1.Layout tent on cargo box with tailgate open- gold tent pole sleeves on top, tent door/screen on tailgate, six large hooks/straps on top of tent.

2. Slip bottom flap at back of tent under tailgate and above bumper. Position tent as shown in above photo.

3. Attach small hooks to inside rail on one side. There are seven small hooks per side.

4. Attach side hooks to bottom of truck. Take out slack in strap but do not tighten yet.

 

5. Repeat steps 3 & 4 on other side. Check that small hooks are still attached. Reattach if needed. Now tighten outside straps. Then tighten front corner adjustment straps, as seen in above photo.

6. Slip tent poles in tent pole sleeves as shown above.

7. Orient rain fly so that logo is on right back and place over tent as shown above. Attach fly to tent at the four velcro fasteners.

8. Insert fly poles in fly sleeves on front and back edges of fly (gold in front and black in back).

9. Insert tent poles in grommets on one side. Go to other side and erect tent by pushing on tent pole while holding sleeve. Attach clips to tent poles (9A). Connect the fly center bottom clip (9B) on each side.

10. Insert end of fly poles in grommets below tent pole sleeves. Tension fly by connecting fly corner bottom clips. Connect remaining fly bottom clips. Finally, connect back straps to bumper to complete the set up. You can open fly sides for increased ventilation.